Huawei B315s-936 Admin Access (Globe)



How to Obtain Huawei B315s-936 (Globe) Admin Access:

also read → How to Unlock Huawei B315s-936 tutorial


1) Enter USB mode
2) Run CID reader in USB mode and enter the following commands.

Note: select proper COM port in your CID reader before entering the codes below. To check if you have chosen the right COM Port, click on “Read IMEI”. The “Logs” window should display the modem’s IMEI number otherwise select a different COM Port. Do not edit the codes . You might brick your modem  (Joke lang).

also read →  How to Fix Huawei b315s-936 red light




3) Enter the following commands:

First Code:
This Query Datalock Status Value. Default value is “1” (Enabled)


at^datalock?     


Second Code:
This Sets The Datalock Value to 12345678


AT ^ NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    

Third Code: This Sets Datalock Status value to “0” (Disabled)

at^datalock="12345678" 

Fourth Code: This will set your modem to factory mode

at^sfm=1  

Fifth Code: This will reset your modem. Wait until the modem reboots and shows a 

AT^reset    

---Steady power light indicator Only !!

4) Connect your modem to your PC via LAN Cable

Under “Network Properties”, Set IP manually as follows:

click “Use the Following IP Address”

IP address: 192.168.1.100

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

Tick “Use the following DNS Server Adressess”

Preferred DNS: 192.168.1.1

Alternate DNS: (leave blank)

Click OK




5) Run “Config Updater”  login as user user and wait for it to complete successfully.






also read → Data Eye APK MOD Unlimited Internet

Exit “Config Updater” and reboot modem.





6) Enter USB mode (back to Step 1 USB Mode link)

• Run CID reader in USB mode and enter the following commands:
Pag ayaw mag telnet kayo  192.168.1.1 duon nyo input yan..

Telnet 192.168.1.1
user:admin
pas:admin  or
user:user
password:user




First Code : This command will kick your modem out of factory mode

at^sfm=0

Second Code : Resets and reboots the modem

AT^reset

7) After successfully rebooting, go to Network Properties again and click “Obtain IP

Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the

modem’s web interface by typing 192.168.254.254 in your browser.

Login as....

Username: admin
Password: admin

Go to “Settings”.
Choose “Restore Default”


The modem will reboot.
Done. You now have admin access to your modem.






Set the APN to “internet.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Postpaid/LTE)

Enter this command:

AT+CGDCONT=1,"IP","internet.globe.com.ph"

OR  Set the APN to “http.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Prepaid/LTE)

Enter this command:

AT+CGDCONT=1,"IP","http.globe.com.ph”         

OR Set the APN to “internet” of the Smart Network to be connected to (use if sim is Smart Prepaid/LTE).

Enter this command:

AT+CGDCONT=1,"IP","internet”

Last command Reboots the modem.
AT^reset

Eto ibig sabihin ng format ng command

AT+CGDCONT=1,"IP","http.globe.com.ph"
ATD*99***1#

red = profile priority
green = IP address ex:format (xx.xx.xx.xx)
blue = APN name
pink = dialup number (optional kung 3g ang masagap na signal) source (Freddy3k)
Share on Google Plus

About infotechmaestro

A tech blog to feed every readers mind to know about the latest gadgets, games, what's trending and provide how to tutorials. Connect wih us on Facebook, Twitter, GooglePlus.
    Blogger Comment
    Facebook Comment

2 comments:

  1. sir,. tinatry ko yan... follow all steps bakit ayaw mag login as admin pati narin sa user ayaw na rin.. pa help po saan bang code doon maaring nagkamali ako...?

    ReplyDelete
  2. error po mag yung config updater may loggin
    192.168.1.100
    255.255.255.0
    192.168.1.1
    dns:192.168.1.1

    reply po sa akin your ip/username/password are incorrect.

    Pa help naman po sir.
    ty..

    ReplyDelete